ARMING ALARM SYSTEM:

Enter USER CODE the # (Away) eg. 1 2 3 4 # (Away)

AWAY light or indicator comes ON

DISARM ALARM SYSTEM:

Enter USER CODE then # (Away) eg. 1 2 3 4 # (Away)

Away light comes OFF

MEMORY HISTORY:

Enter MASTER CODE then 3 then # (Away) eg. 1 2 3 4 3 # (Away)

Event is displyed – most recent displayed 1st to the least recent

BYPASSING ALARM SENSORS:

Enter * twice, USER CODE then ZONE then * (Stay)

Repeat for other zones to isolate, then # to exit feature eg to isolate ZONE 2: ** 1 2 3 4 02 * # (Away)

TESTING THE ALARM SYSTEM:

TEST REPORT – Press 9 on keypad until you hear two beeps

SIREN – Press 1 and hold until you hear two beeps – siren will sound for 2 seconds

BELL – Press 2 until you hear two beeps – internal siren will sound for 2 seconds

STROBE LIGHT – Press 3 until you hear three beeps – this will turn stobe ON. Repeat, press 3 until you hear three beeps to turn stobe off.

RESETTING TIME AND DATE:

Enter MASTER CODE then 6 then # (Away) eg. 1 2 3 4 6 # (Away)

Enter the current – day (DD), Month (MM), Year (YY), Hour (HH), Minute (MM)

(EXAMPLE: 15th Nov 2007 at 15:20 hrs = 1 5 1 1 0 7 1 5 2 0 # (Away)

PANEL SOUNDERS:

BEEPING SOUND – If plug pack is unplugged or the mains POWER is disconnected the keypad will SOUND once very minute. To silence, press 5 and hold until you hear two beeps to display fault, see fault list and instructions above then press # to exit this feature.