Mobile: 0408 359 072

Ness Alarm System Batteries - We replace them!

Ness 5000 D8 D16 PROLD PROLX Alarm Battery Replacements Sales and Service in Melbourne

We replace alarm batteries for security alarm systems to:

Ness, Bosch, CROW, DSC, Hills, Honeywell, Vista, EDM, Solution, CK SYSTEMS, DAS, Hills, NX, Tecom, Nidac alarm battery and much more

Ness alarm battery replacements services in Melbourne

Alarm Maintenance recommends a qualified technician to replace the main unit battery to ensure the safety and reliable performance of your system. In most cases the alarm systems clock (date/time) needs to be reset and we run a diagnostic check to reset the service light and beeping sound

The first indication of a low battery will display a service light fault, trouble light on, LO BAT for LCD Codepads, or low battery light on . A low battery condition can cause false alarms at random times regardless if the system is armed or disarmed. Alarm systems will also emit a beeping sound to indicate a problem

Each wireless sensor has at least one Lithium Battery that needs to be replaced on a regular basis. The system detects a low battery in wireless sensors and wireless devices. Lithium batteries provide a minimum of 2 years operation and in most cases provide up to 10 years battery life. Actual battery life will depend on the environment in which the sensor is used, the number of triggers that the wireless sensor has had to send, and the type of sensor used. Factors such as humidity, changes in temperatures may lead to the reduction of battery life for a detector. If you have a low battery in a wireless sensor, a low battery message is displayed on the Keypad.

Smoke and Fire Detector Batteries

A battery operated smoke detector with a low battery also emits a single "chirp" sound once every 20 to 30 seconds, making attention to users that the smoke detector battery is very weak. If you do not replace a smoke detector's low battery, the smoke detector may sound continuously and can be very annoying. The low battery chirping comes on as a warning that battery needs immediate replacing. Important: Use only batteries recommended by your security company.

Replacing wireless movement sensor batteries

Before you begin the battery changing process place your alarm system on test at the monitoring control room if it is monitored. You can open the sensor with a medium sized screwdriver wedged into the base and twist to remove cover. Some models like the Ness sensor has a pull down front cover. When changing batteries: Change both of them if there are two. Replace batteries to the sensors. Once the covers are back on, wait 6 minutes to test. One of the most common faults with alarms are movement sensors is a low battery and damages caused as a result of a power surges or lightening strikes. Alarm systems according to Australian Standard AS2201 requires that a commercial alarm system and monitored alarms should be serviced every 12 months and for a residential alarms between 2-3 years.

WE SERVICE MOST MAKES & MODELS

NESS D8 NESS R8 R16 WIRELESS NESS L8, NESS D16 NESS D24 NESS Eco X8, NESS Pro L NESS Pro LD NESS Pro LX LXE NESS 5000 SERIES BOSCH Ultima 880 862 844 Bosch 16 plus SOLUTION DAS Direct Alarm Supplies NETWORX - NX SERIES HILLS ADEMCO VISTA CK SYSTEMS HONEYWELL EDM CROW DSC NIDAC CM-8 CHUBB